BR's Custom Bars 

                                         
THE LARGEST CUSTOM HANDLEBAR WEB SITE IN THE WORLD


      

APE HANGERS

STOP AND PLEASE READ

ALL BARS WILL BE SET UP TO FIT YOUR MAKE MODEL OF BIKE TO YOUR SPECS AS ORDERED.  EVERY BAR IS MADE TO ORDER.  WE DO NOT CARRY BARS IN STOCK.

PLEASE VISIT OUR "MEASURE NEW BARS" PAGE (UNDER THE HANDLE BAR TAB) TO FAMILIARIZE YOURSELF WITH HOW WE MEASURE BARS.

The price under the bars you are looking at is the price for the bars and all modifications to make the bars fit your bike. The bars are all RAW steel if you want powder coating or chrome that is extra.



WE OFFER POWDER COATING & SHOW CHROME.
Powder Coating: Gloss Black, Flat Black $90.00
Show Chrome Small Bars: $200.00
Show Chrome Large Bars: $225.00
Show Chrome on exotic bars $250.00 and Up 
Custom Made Spacers For hand controls  $50.00
Bars over 18" add $20.00
                          SHIPPING

Shipping Costs For The 48 States:  $45-$95

Shipping Costs Out Of The Country $125.00 All Bars
**Pricing may change at any time.

Shipping - We ship Fed Ex Ground or Fed Ex Home Delivery to the States and we use USPS to ship internationally.  If you need your bars quicker than our standard shipping you must pay the difference before the bars leave our shop. 


WE ACCEPT: VISA, MASTER CARD, DISCOVER PAYPAL, AND MONEY ORDERS. Your order will not be processed until payment is received  in full.

Handlebar Prices Are Subject To Change Do To Customers Modifications.

Please visit our "Contact Page" for frequently asked questions and our office number.

                
                           
PLEASE  NOTE THERE WILL BE A $50.00 SERVICES CHARGE ON ALL CANCELED ORDERS.


 

 MADE IN USA

                       
 

 

 WE GOT YOUR APES

 
These are the powder coating finishes
available for $90.00

NEW VIDEO
BRs NEW VIDEO ALL ABOUT BR AND THE COMPANY JUST CLICK HERE
**Please understand this video was made a few years ago.  BR may not be able to speak to you personally but someone will be able to answer any questions you may have. 

BR show off his new handle bars security device 
              to see video                CLICK HERE 
 
 
BARS AND ENGINE GUARDS THAT MATCH
 
  CHROMED 23"


BR shows you the 1 1/2" LIGHTNING BOLTS in detail

BRs Newest Design
Lighting bolt handle bars with Sweeping K9 tops
                            
   
Available in 1 1/2"  Price $770.00
In raw steel with polished stainless steel tips
All raw steel (tips included but not polished stainless
as shown above)    $725.00
Chroming for this bar $375.00

   
Available in 1 1/2" $650.00  
In raw steel with polished stainless steel tips 
All raw steel (tips included but not polished stainless
as shown above)    $605.00
Chroming for this bar $350.00


     
 
1 1/2" Double Strike Lighting Bolt
  Bar shown in 16" Rise
  Pricing in RAW
  1 1/4" $600.00
  1 1/2" $650.00
  Chroming for this bar is $325.00
  **Bar can NOT be made any lower than a 14" rise.**



      
  1 1/4" LIGHTNING BOLTS 
  Pull Back: 5"
          Width: 34"            
Rise: 16" 
             Price: $500.00          

                                   Chroming cost on bars is $250.00                                    
                                              
  Bars Can Be Changed To Your Specs
  **Bar can NOT be made any lower than a 12" rise.**
 
WE CAN GET YOUR NEW CABLES AND HOSES FOR YOUR NEW BARS
              
   
  1 1/2" LIGHTNING BOLTS 
Pull Back: 5" to 7"
      Width: 34"                     
  Rise: 18"                   
Price: $525.00
     

Chroming cost on bar is $250.00
                                             
 Bars Can Be Changed To Your Specs
  **Bar can NOT be made any lower than a 12" rise.**
                             

    
1 1/2" Lighting Bolts Bent
Price in RAW $575.00
Chroming for this bar is $275.00


     
1 1/2" Talon Bar

                                                              Rise 12"                                                               
Width 34"
Pull back 5"

Price 1 1/2" $450.00

These bars can not go smaller than a 33" width
 
1 1/2" GODZILLA BARS 
Pull Back: 5"
                                                     Width : 34"                                                    
Rise: 18"
Price: $450.00
 SPECS CAN BE CHANGED
 
       
1 1/4"  APE KILLERS
Pull Back: 5"
Width: 32"
Rise: 13" 
1 1/4" Price $275.00
1 1/2" Price $300.00
                                                      

                                               
ALL BARS CAN BE CHANGED TO YOUR SPECS

BR show the 1 1/4" SWEEPING APE KILLERS in CHROME 
to see video                 CLICK HERE 

1 1/4" BENT APE KILLERS 
Rise: 16"  
Width: 34"
Pull back5"
Price: 300.00 
These bars can not go smaller than a 32" width
BR shows you the 1 1/4" BENT APE KILLERS in detail
to see video      CLICK HERE

1 1/2" BENT APE KILLERS
Pull Back: 5"
Width: 35"
Rise: 18"
$350.00

These bars can not go smaller than a 32" width
                                           

 1 1/2" BENT APE KILLERS WITH POLISHED STAINLESS SPIKES
  Look best in  gloss black powder coat
  Bar specs same as top bars or made to your specs 
  Bar price for raw steel and stainless spikes 
  11/4" PRICE:  $425.00
  1 1/2"PRICE:  $475.00 
  powder coating extra

BR show you the BENT APE KILLERS AND STAINLESS SPIKES in detail
to see video             CLICK HERE

 
 STAINLESS SPIKES OPTION  
 for all 1 1/4", 1 1/2" spiked bars 
 Price $120.00     
                                        
       
                          


 These are our powder coating finishes available.
 
 1 1/4" GORILLA KILLERS
  Pull Back: 5"   
  Width:34"
  Rises: 16"
  1 1/4" Bars    Price:$325.00       
  1 1/2" Bars    Price:$ 350.00      

 
1 1/4" GORILLA BARS
 
Pull Back: 5"
 Width: 34"
 Rise: 16"
1 1/4" Bars   Price: $325.00
1 1/2" Bars   Price: $350.00

          
 
1 1/2" NARROW GORILLA BARS
Pull Back: 4"
Width: 28"
Rises: 16"
1 1/4" Bars Price: $350.00
1 1/2" Bars Price: $375.00
        


Here are two different Gorilla Bars that we have made for customers

  
    These were made for a trike.
ask for pricing

   
              
1"  APES Beaters             1 1 /2" Apes Beaters Powder Coated
 

   1" Price: 250.00
          1 1/4" Price: 275.00
          1 1/2" Price: 300.00


1 1/2" Old School Apes with Rounded Top

Pull back: 5"
Width: 32"
Rise: 16"

Price in RAW steel  1 1/4" $300
                                     1 1/2"  $325

 
  7/8" APE BEATERS
         Pull Back: 4"
         Width: 32"
         Rise: 13" 
         Price: $200.00

 
1" APE BEATERS
 Pull Back: 5"
 Width: 34"
 Rise: 16"
1" Price: $250.00
1 1/4" Price $275.00
           
           
 
1 1/2"  K9'S
Pull Back: 5"
Width: 36"
Rise: 18"
1 1/4" K9's             Price: $375.00
1 1/2" K9's             Price: $400.00
           
These bars can not go smaller than a 32" width
 
 1 1/2"  K9'S STAINLESS SPIKES
 Pull Back: 5"
 Width: 36"
 Rise: 18"
1 1/4" K9's             Price: $490.00
1 1/2" K9's             Price: $525.00
These bars can not go smaller than a 32" width
 Powder Coating Extra

 
  1 1/2" Sweeping K9s
 Pull Back: 5"
 Width: 34"
 Rise:  16"
 These bars can not go smaller than a 32" width
 Price - $475.00 in raw steel
 Bars shown in Chrome.  Chrome is an
 additional $225 for these bars.

 WE CAN GET YOUR NEW CABLES AND HOSES FOR YOUR NEW BARS

 

 32" HIGH K9s 
 WE MAKE BARS TO ALL SPECS AND THEN SOME
 Yes the bars where made for a customer
                                                  
                                              

                                          
                                                                             

 
                     1 1/2" New Wave 4                           1 1/2" New Wave 4 with shorter rise      
Pull back: 9"                                                   Pull back:  13"
Width: 32"                                                         Width: 32"
Rise: 7"                                                              Rise: 4"
                                                             
1 1/4" $275.00
1 1/2" $300.00



 
1 1/4" NEW WAVE 3 
This bars will replace your stock bars with a custom look
Pull Back: 9"
Width: 32"
Rise" 10"
1 1/4"  Price: $275.00
1 1/2"  Price: $ 300.00  

BR show you the 1 1/4" NEW WAVE 3 bars in detail
                   
                                                         
STOP IN TO OUR "BRs STORE"...WE HAVE A FEW NEW WAVE 2s AVAILABLE!        

1 1/4" NEW WAVE 2
This bars will replace your stock bars with a custom look
Pull Back: 9"
Width: 32"
Rise" 12"
1 1/4"  Price: $250.00
1 1/2"  Price: $ 275.00  
RAW  STEEL

BR show you the 1 1/2' NEW WAVE 2 bars in detail
to see the video            CLICK HERE

BR shows you the 1 1/4" NEW WAVE 2 bars in black powder coating 
to see the video             CLICK HERE

1 1/4" NEW WAVE HD BARS
This bars will replace your stock bars with a custom look
Pull Back: 9"
Width: 32"
Rise" 6"
1 1/4"  Price: $250.00
RAW  STEEL


1 1/2" NEW WAVE HD BARS
This bars will replace your stock bars with a custom look
Pull Back: 9"
Width: 32"
Rise: 7"
1 1/2"  Price: $275.00
RAW  STEEL

 
1 1/4" VAPES
Pull Back: 10"
Rise:10"
Width: 33"
1 1/4" Price: $275.00
1 1/2" Price: $325.00


1 1/4" VAPES WITH CROSS BAR
Pull Back: 10"
Rise:10"
Width: 33"
1 1/4" Price: $275.00
1 1/2" Price: $325.00


These bars can not go smaller than a 32" width. 
 
1 " BENT APE BEATERS
Pull Back: 5"
Width: 34"
Rise: 14"
Price: $225.00
           
These bars can no go smaller than a 32" width

1 1/4" BENT APE BEATERS
Pull Back: 5"
Width: 34"
Rise: 18"
Price: $275.00
                                       

BR shows you the 1 1/4" BENT APE BEATERS in detail
to see the video              CLICK HERE

These bars can not go smaller than a 32" width
 
1 1/2" BENT APE BEATERS
Pull Back: 5"
Width: 34"
Rise: 16"
Price: $300.00
Powder coating extra

These bars can not go smaller than a 32" width
 
1 1/2" BENT APE BEATERS
Pull Back: 5"
Width: 38"
Rise: 16"
Price: $300.00
                                
                                   
                   
    
This is the side view of our Sweeping Beater and the view from the front.  We do not make these bars to have any curve forward or backward. 




These bars can not go smaller than a 32" width
  
 
1 1/4 SWEEPING BEATERS
 Pull Back: 5"
 Width: 34"
 Rises: 16"
 1 1/4" Price: $325.00     
     
            
WE CAN GET YOUR NEW CABLES AND HOSES FOR YOUR NEW BARS                  
These bars can not go smaller than a 32" width
  
 1 1/2" SWEEPING BEATERS
 Pull Back: 5"
 Width: 35"
 Rises: 16"
 1 1/2" Price: $350.00

1 1/2" Sweeping Beaters for the new 2015 ROAD GLIDE
         Price: $400.00
            

                                                 
These bars can not go smaller than a 34" width ring finger to ring finger
ETE is 37 1/2"

MAY 2014 - PLEASE VISIT OUR STORE.  WE HAVE 1 1/2" SWEEPING BEATERS
IN 12" AND 14" RISE AVAILABLE FOR PURCHASE.
              

            
 All Bars Can Be Made To Your Specs   
 Powder Coating extra
 These bars can not go smaller than a 32" width
 
  1 1/2" SWEEPING BEATERS WITH LESS RADIUS
  Pull Back: 5"
  Width: 34"
  Rises: 14"
  1 1/2" Price: $350.00
GUSSETS ADDITIONAL $50
 
                   All Bars Can Be Made To Your Specs                          
                                   
                                                           

BRs Newest Accessory!!!!!

STASH CAP FOR THE OPEN APES  $100

        









                 
 Here are two different versions of "Open Apes" we have made recently. 

1 1/4" OPEN APES
Pull Back: 5"
Width: 34"
Rise: 14"
Price: $275.00
Powder Coating Extra
All Bars Can Be Changed To Your Specs

BR shows you the 1 1/4" open apes in detail
to see the video          CLICK HERE

1 1/2" OPEN APES
Pull Back: 5"
Width: 35"
Rise: 18"
Price: $325.00
These bars can not go smaller than a 32" width



  
1 1/2" Open Apes with Rounded Tops
Rise: 8"
Width: 32"
Pull back: 7"
1 1/4"  $300.00
1 1/2"  $325.00
Powder Coating Extra
     


These bars can not go smaller than a 32" width
 
1 1/2" OPEN APES WITH RISERS
Pull Back: 5"
Width: 34"
Rise: 10"
11/4"  Price: $300.0
11/2"  Price: $350.00
                                          Risers: 1 1/4" High                                      
Gussets Extra
                                                                        
These bars can not go smaller than a 32" width

     
        
     
1 1/2" Road Glide Draggers                1 1/2" Road Glide Draggers Open Top
Pull Back:  5"                                    Pull back: 5"
Width:  34"                                          Width: 34"
Rise:  7"                                            Rise: 7"

Price in RAW steel                                  Price in RAW Steel
   1 1/4" $325.00                                           1 1/4" $350
   1 1/2" $350.00                                           1 1/2" $375

All measurements can be changed.  The measurements listed are of the bars
shown in the photos.


 
1 1/4" BEATERS WITH DROP TOP
Pull Back: 5"
Width: 34"
Rise: 14"
1 1/4"         Price: 325.00
1 1/2"         Price: 350.00
           
 
BR show you the 1 1/4" BEATERS WITH DROP TOP in detail
                        to see video         CLICK HERE


These are our powder coating finishes available.
Website Builder